Menu Close

IMPORTANT

We consider the function of the rollers to be fundamental: in fact, combined with a perfect geometry – guaranteed by the machine – they optimize the finishing of the profile and ensure repeatability in the case of continuous work.
Our experience allows us, based on .DXF or .DWG drawings, to offer advice and suggestions about the effective possibility of the profile to be bent, even before its extrusion.

Rollers

A2004

Reduction bushing.

RSP

Kit of decimal washers.

PVC filling strips

PE filling strips

A2003D

Digital reading arcmeter complete with software and WI-FI connection for the automatic management of the springback calculation.
Equipped with two interchangeable reading bars, with centre-to-centre distance 120 mm and 240 mm.

A2002DR

Digital reading arcmeter with direct detection of radius and sagitta.
Equipped with two interchangeable reading bars, with centre-to-centre distance 120 and 240 mm.

A2002D48

Reading bar with centre-to-centre distance 480 mm to detect large radii.

A2002D96

Reading bar with centre-to-centre distance 960 mm to detect large radii.

AT0034

Roller tightening pneumatic kit.

AT0007

Stiffening tie-beam for the central shaft.

AT0004

Manual equipment to drive angle-shaped profiles.

AT0023

Trolley for rollers.

AT0018

Quality control table for curved profiles, complete with additional shelf, storage compartments for PVC and PE filling strips, compressed air connections and adjustable blocking and stabilizing bars.